- Shooting Gallery Job: Accessible as Job #8 in Career Mode, located at the Wengerloof Carnival.
- Inside Shooting Strategy: Focus on the Bigfoot Target first to secure the "Where's Woolly?" achievement.
- Best Equipment: The 15° Yellow Nozzle or the Adaptable Nozzle are ideal for the detailed targets and narrow mechanisms.
- Multi-Stage Cleaning: This job involves complex interior layers, requiring systematic sweeps from the ceiling down to the floor.
- Completion Tip: Use the Dirt Highlight pulse frequently to find grime hidden behind moving target rails and wooden supports.
Mastering the Shooting Gallery: Job #8 Overview
The PowerWash Simulator 2 inside shooting gallery is one of the most visually distinct early-game assignments in the Career Mode. Located at the Wengerloof Carnival in the Muckingham Recreation Ground, this job tasks players with restoring a grime-covered attraction to its former glory. Unlike the earlier vehicle-based tasks, the Shooting Gallery presents a confined interior space filled with intricate targets, mechanical tracks, and multi-layered wooden surfaces.
To succeed here, you must understand the layout of the booth. The structure includes a heavy wooden exterior, but the bulk of the work happens inside the "shooting" area, where rows of targets—including ducks, stars, and the elusive Bigfoot—are mounted on rotating or sliding mechanisms. Because many of these parts are small and recessed, choosing the right pressure setting is critical to avoid wasting water and time.
| Job Attribute | Detail |
|---|---|
| Unlock Order | Job 8 |
| Location | Wengerloof Carnival, Muckingham |
| Job Type | Attraction / Interior Structure |
| Difficulty | Easy to Moderate |
| Primary Goal | 100% Cleanliness of all targets and booth surfaces |
| Achievement | Where's Woolly? (Clean Bigfoot first) |
Before spraying the interior, clean the outer counter and the top sign. This prevents runoff from dirtying the interior surfaces you have already cleaned, keeping your workflow efficient.
Precision Equipment for Inside Shooting Jobs
When tackling the PowerWash Simulator 2 inside shooting gallery, your choice of nozzle determines how quickly you can clear the fine details. The targets are significantly smaller than the panels on the Removals Van or the walls of the Public Facility. High-pressure, narrow-angle nozzles are your best friends for the interior mechanisms, while wider fans are better for the large backboard and floor.
The following table compares the efficiency of various nozzles specifically for the Shooting Gallery's unique geometry:
| Nozzle Type | Cleaning Width | Pressure Level | Best Used For |
|---|---|---|---|
| 0° Red Nozzle | Very Narrow | Maximum | Stubborn rust on target hinges and deep seams |
| 15° Yellow Nozzle | Narrow | High | Individual targets (ducks, stars) and lettering |
| 25° Green Nozzle | Medium | Moderate | Main wooden backboard and side panels |
| 40° White Nozzle | Wide | Low | Rinsing large flat floor areas and the ceiling |
| Adaptable Nozzle | Variable | Dynamic | Switching quickly between targets and the booth frame |
| Soap Nozzle | Very Wide | Low | Pre-treating the heavily soiled floor and counter |
The tracks that move the targets can hide significant amounts of dirt. Ensure you crouch and aim upward into the rail slots to reach the 100% completion threshold for the "Tracks" and "Supports" components.
Step-by-Step Shooting Gallery Cleaning Route
To achieve a perfect score without hunting for the final 1% of dirt, follow this systematic route. The PowerWash Simulator 2 inside shooting gallery is best cleaned from the inside out and top to bottom. This ensures that dirty water from the ceiling doesn't ruin your freshly cleaned floor.
The Bigfoot Priority
Before cleaning anything else, locate the Bigfoot Target at the back of the gallery. Focusing solely on this target until it pings 100% will unlock the Where's Woolly? achievement. Avoid using wide nozzles during this step to prevent accidental cleaning of adjacent targets.
Ceiling and Upper Frame
Stand inside the booth and look up. Clean the ceiling panels and the upper support beams first. Use the 25° nozzle for the broad panels and the 15° nozzle for the corners where the beams meet the walls.
The Backboard and Side Walls
Sweep the large vertical surfaces. These areas hold the most visible grime. Start from the top left and move in horizontal lines across to the right. The 25° nozzle provides the best balance of speed and pressure for these wooden surfaces.
Target Rows and Tracks
This is the most time-consuming part. Clean each row of targets (Ducks, Stars, and Pipes) individually. Make sure to spray the front, back, and the narrow edges of every target. Use the 15° nozzle to ensure you hit the small hinges that connect them to the tracks.
Counter and Floor
Finish the job by cleaning the front counter where the "rifles" would sit, followed by the floor. Use the Soap Nozzle if the floor grime is particularly thick, then rinse it away with the 40° nozzle or the SwirlForce Surf Ace if you have unlocked it.
If you successfully cleaned the Bigfoot target first, you should see the "Where's Woolly?" notification. If you accidentally cleaned another part to 100% first, you will need to replay the job in Free Play to earn this achievement.
Finding Last Dirt in the Gallery Interior
The PowerWash Simulator 2 inside shooting gallery is notorious for having "hidden" dirt that prevents the final completion ding. Because the attraction has so many moving parts and overlapping wooden boards, grime often hides in the shadows or on the undersides of the target tracks.
Final Completion Checklist:
- Check the undersides of all three target tracks
- Inspect the rear faces of the duck targets
- Clean the narrow gaps between the floorboards and the back wall
- Verify the hinges and supports for the Bigfoot target
- Spray the very top edge of the front counter
- Use the Tab key (or D-pad up) to pulse the dirt highlight while crouching
If you are stuck at 99%, open the Object List in the pause menu. Find the item that is not at 100% and click the orange "Select" icon. This will highlight the specific part in the game world with a pulsing orange glow, making it much easier to locate.
Comparison: Carnival Jobs vs. Career Jobs
The Shooting Gallery is part of the Wengerloof Carnival set, which offers a different challenge compared to the standard residential or vehicle jobs found elsewhere in Muckingham. These jobs focus more on inside shooting mechanics, intricate details, and interactive elements.
Shooting Gallery (Job 8)
- Focus: High-detail targets and narrow tracks.
- Key Challenge: Intricate mechanical parts.
- Best Tool: 15° Nozzle or Adaptable Nozzle.
Mini Roller Coaster (Job 25)
- Focus: Large structural cleaning and height.
- Key Challenge: Reach and verticality.
- Best Tool: Extensions and Scaffolding.
Fun House (Job 30)
- Focus: Rotating floors and large interior rooms.
- Key Challenge: Moving surfaces and vast areas.
- Best Tool: Surface Cleaner and Professional Washer.
Town Floats (Job 37)
- Focus: Mobile vehicle collections.
- Key Challenge: Unique shapes and thematic cleaning.
- Best Tool: Soap and 25° Nozzle.
While the Shooting Gallery is an early job, it pays well for the time invested. It is an excellent job to replay in Free Play if you need a few extra credits to upgrade your Prime Vista or Urban X washer.
Advanced Tips for 100% Efficiency
To truly master the PowerWash Simulator 2 inside shooting gallery, you should look beyond just spraying water. Efficiency in 2026 is about using the right tool for the right surface at the right time.
| Surface Material | Recommended Pressure | Recommended Nozzle | Tip |
|---|---|---|---|
| Painted Wood | Moderate | 25° Green | Avoid 0° as it can be too narrow for large panels |
| Metal Tracks | High | 15° Yellow | Focus on the interior grooves where grease accumulates |
| Plastic Targets | Moderate | 15° Yellow | Clean the edges first to trigger the completion faster |
| Concrete Floor | Low to Moderate | 40° or Surface Cleaner | Use soap for the dark stains near the entrance |
When cleaning the Shooting Gallery in co-op mode (up to 4 players), ensure your teammates are aware of the "Where's Woolly?" achievement. A single stray spray from a friend can ruin the "clean Bigfoot first" requirement for the entire party.
PowerWash Simulator 2 FAQ
Q: How do I unlock the Shooting Gallery in PowerWash Simulator 2?
The Shooting Gallery is the 8th job in the Career Mode campaign. You must complete the previous 7 jobs, including the Removals Van, Public Facility, and Teapot Tea Room, to unlock it.
Q: What is the best nozzle for the inside shooting targets?
The 15° Yellow Nozzle is the most effective choice for the targets themselves. It provides enough pressure to remove grime quickly while having a wide enough fan to cover the small star and duck shapes in one or two passes.
Q: Can I get the 'Where's Woolly?' achievement in Free Play?
Yes. If you missed the achievement during your initial Career Mode run, you can select the Shooting Gallery in Free Play and focus on the Bigfoot target first to earn it.
Q: Why is my Shooting Gallery stuck at 99%?
This is usually due to dirt on the 'Tracks' or 'Supports' located behind the moving targets. Use the Dirt Highlight tool while crouching to find small specks of grime on the mechanical parts inside the booth.